Skip to main content

ATS: Air Tech & Solutions

Fix the AC you have. Install the one your home needs.

Repair and servicing for all major brands, plus engineered installation for homes, shops, and whole towers. Daikin-authorized technicians, backed by 20+ years of M&E engineering.

  • Daikin-authorized
  • Since 2002
  • All major brands

What do you need today?

01 / Repair & servicing

Fix or service my AC

Dripping water, weak cooling, ice on the pipes, a breaker that trips: we diagnose and repair all major brands, not just Daikin.

  • All major brands
  • One-time call service
Call 09 977 122 850

You get a quote before any work starts.

What a visit covers

02 / New installation

Install a new system

Home, shop, or office: we size it for your space, because an oversized unit means higher bills, poor humidity control, and short cycling. Every install can include an annual maintenance contract.

  • Load calculation & sizing
  • Daikin-authorized
Get an estimateThe four system types

03 / Commercial & M&E

Cool a whole building

Towers, hotels, telecom infrastructure: multi-zone VRF and ducted plants, delivered as M&E main contractor across HVAC, electrical, plumbing, and fire fighting. Our longest client has kept our service contract for 18 years.

  • Longest client: 18 years
  • M&E main contractor
Talk to an engineerThe service record

Repair & servicing / What a visit covers

It drips. It rattles. The room stays warm.

Most calls we get start exactly like that. Servicing is where Greenish started in 2002, and a technician visit runs the same 10-point inspection every time, so the cause gets found, not guessed. Daikin-authorized service, on all major brands.

It drips water down the wall
A blocked drain is the usual cause. Drain line and drain pan cleaning is part of every visit.
It runs all day, the room stays warm
Gas pressure checks and refrigerant recharge, after we rule out airflow and sizing problems.
It trips the breaker or will not start
Voltage and ampere checks, electrical connection tests, full electrical diagnostics.
It smells musty, or it rattles
Blower fan cleaning and checks, evaporator and condenser coil cleaning, plus steam cleaning and disinfection.

Our stanceWe repair before we replace. If the compressor is truly gone, compressor replacement is routine work for us. Either way, you see the quote before any work starts.

The 10-point inspection checklist

  1. 01Filter cleaning
  2. 02Air flow & temperature checks
  3. 03Indoor PCB checks
  4. 04Blower fan cleaning & checks
  5. 05Drain line & drain pan cleaning
  6. 06Gas pressure checks
  7. 07Voltage & ampere checks
  8. 08Evaporator & condenser coil cleaning
  9. 09Electrical connection tests
  10. 10Functional tests

Every preventive maintenance visit runs this checklist, carried out by Daikin-authorized technicians with Wipcool service tools.

Beyond the checklist

  • Refrigerant recharge
  • Compressor replacement
  • Electrical diagnostics
  • Steam cleaning & disinfection

One-time call service

Something is wrong, you call, we come. One visit, one job, no contract attached.

Annual maintenance contract

Scheduled visits through the year, the same 10-point inspection each time. Our longest-running client kept the same service contract for 18 years.

Book a visit

Call 09 977 122 850

Or message us a photo of the unit: Viber / Messenger below

New installation / Sized for your space

A room that never cools is usually a sizing problem.

The biggest unit is not the answer; the right one is. An oversized unit short-cycles and wastes electricity, an undersized one never catches up. So installation starts with load calculation and sizing, residential or commercial, split or centralized. We install every type:

01 Wall split

Bedrooms, living rooms, small shops, single offices.

02 Ceiling cassette

Shops, clinics, restaurants, open-plan offices.

03 Ducted / central

Whole floors, hotels, showrooms, premium fit-outs.

04 VRF / multi-split

Office towers, condos, multi-zone commercial buildings.

Right-size first

BTU estimator

Not sure what capacity you need? The estimator takes your room size, sun exposure, and usage, then suggests a sensible starting point before anyone tries to sell you anything.

Estimates are indicative. Final sizing follows an on-site heat-load survey.

How we install

Standards we hold every job to

  • Wall core 65-70 mm
  • Drain slope 3-5 deg
  • N2 test 40 kg/cm2
  • Vacuum below 500 micron
  • Delta-T 8-12 C at handover

Standard trade values from our installation procedure: how we drill, slope, test, evacuate, and commission before handover.

Commercial & M&E / ATS service record

Contract history, not marketing.

Greenish Engineering has delivered HVAC and M&E contracts since 2002; a full M&E provider since 2016. ATS, established 2022, is the dedicated air conditioning branch of that practice.

Greenish Engineering founded, HVAC service from day one.
2002
Greenish Engineering founded, HVAC service from day one.
Continuous service for Myanmar Posts & Telecommunication, across 200+ BTS stations.
18 yrs
Continuous service for Myanmar Posts & Telecommunication, across 200+ BTS stations.
Inspection checklist behind every preventive maintenance visit.
10-point
Inspection checklist behind every preventive maintenance visit.
2002-2020

Myanmar Posts & Telecommunication

200+ BTS stations and core network sites, 18 years of continuous service

Maintenance contractor
2018

8.5 Story Office Tower, Parami Road

25 Daikin AC units; electrical, plumbing, fire, HVAC

M&E main contractor
2019

YAG AR Head Office

32 Daikin AC units, full M&E scope

M&E main contractor
2019

Surbung Airport (DCA)

32 Daikin AC units; electrical and HVAC

M&E main contractor
Talk to an engineerEmail the project brief

Multi-zone VRF, ducted plants, and full M&E scope, scoped from your drawings or a site survey.

How it works

Four quiet steps.

  1. Step 01

    Site survey

    We visit, measure the space, and run the heat-load numbers.

  2. Step 02

    Proposal

    A written scope, equipment list, and price. You decide from there.

  3. Step 03

    Installation

    Installed, pressure-tested, and commissioned to written standards.

  4. Step 04

    Maintenance

    One-time calls or an annual contract, on the 10-point checklist.

Estimator / Right-size first

Size it before you buy it.

Calculate your cooling requirements and request a custom proposal, all in one step.

Your details

Floor level

Estimated system

Enter your room area to see your estimated HVAC system requirements.

Get your custom proposal

Request a site assessment and consultation, no estimate required.

Our technical team will call you back during office hours with a detailed proposal based on your estimate.

Disclaimer: This is a preliminary estimate for reference purposes only. Actual system sizing requires a professional site survey and detailed heat load analysis. Calculations assume standard insulation, single-layer glazing, and tropical climate conditions.

Get started

Or just call. We pick up.

Ready for better air? Get a site assessment and a custom HVAC proposal. No obligations, no pressure, just engineering expertise.

Service
09 977 122 850
Questions
09 977 122 840
Hours
Weekdays & Saturday, 9:00 AM – 5:00 PM
Showroom
Parami Road, Ward (8), Yankin Township, Yangon

Pick a channel

Send a photo or video of the problem on Messenger: it speeds up diagnosis.